Product information
- INCI: Coco Glucoside
- pH level: 11,5 - 12,5 (20% solution, 20 ºC)
- Country of origin: Spain
- Recommended maximum: The available technical sheet does not specify a fixed maximum usage level; adjust according to foam, viscosity, pH, stability, sensory properties and tolerance.
- TS3210
- CAS number: 68515-73-1
- EINECS number: 500-220-1
Prices always include VAT.
Description
Coco Glucoside - Ecocert
A non-ionic surfactant of plant origin, obtained from glucose and coconut fatty alcohols, suitable for formulating cosmetic cleansers and mild detergents.
It provides cleansing and foaming power and is particularly useful as a primary surfactant or as part of combined systems for shower gels, shampoos, facial cleansers, children's products and hygiene formulas focused on mildness.
Characteristics
- Non-ionic surfactant.
- Active matter: 51% ± 1%.
- Very soluble in water.
- Readily soluble in ethanol and oils according to the technical data sheet.
- Without preservatives.
- Plant origin.
- Suitable for natural cosmetics according to the available documentation.
INCI
Coco Glucoside.
Technical data
- CAS number: 68515-73-1.
- EINECS number: 500-220-1.
- pH: 11,5 - 12,5 in a 20% solution at 20 ºC.
- Viscosity at 20 ºC: ≥ 2000 mPas.
- Sodium chloride: ≤ 3%.
Indicative use in formulation
It can be used in rinse-off formulas such as gels, shampoos, facial cleansers and hygiene products. The use level must be adjusted according to the total surfactant system, desired active matter level, final pH, viscosity and formula tolerance.
Formulation and storage precautions
- Avoid containers containing nitrites.
- Do not store below 5 ºC; if it becomes cloudy, heat indirectly and homogenise.
- Keep tightly closed in a cool, dry, ventilated place, away from sunlight and heat sources.
- As it contains no preservative, check product quality after opening.
- Final formulas must be tested and validated before use or marketing.
1. Mild fragrance-free shower gel - 1 litre / approx. 1000 g
A rinse-off cosmetic formulation for gentle cleansing, with Coco Glucoside as the main part of the surfactant system.
- Distilled or deionised water: 663,50 g
- Liquid Vegetable Glycerine: 30 g
- Xanthan Gum: 3,50 g
- Coco Glucoside: 160 g
- Decyl Glucoside Surfactant: 80 g
- Coco Betaine: 55 g
- Geogard 221 / Cosgard Preservative: 8 g
- Citric acid diluted to 20%: as required to adjust pH
- pH Indicator Strips or pH meter: as required
Target pH: 5,2 - 5,8.
2. Mild liquid hand soap - 1 litre / approx. 1000 g
A simple, fragrance-free formula for home use, designed to provide moderate foam and a fluid gel texture.
- Distilled or deionised water: 698 g
- Coco Glucoside: 180 g
- Coco Betaine: 80 g
- Liquid Vegetable Glycerine: 30 g
- Xanthan Gum: 4 g
- Geogard 221 / Cosgard Preservative: 8 g
- Citric acid diluted to 20%: as required to adjust pH
Target pH: 5,0 - 5,8.
3. Mild cleaning spray for washable surfaces - 1 litre / approx. 1000 g
A household cleaning formulation for non-porous, washable surfaces. It is not a disinfectant and must first be tested on an inconspicuous area.
- Distilled or deionised water: 782 g
- Coco Glucoside: 80 g
- Decyl Glucoside Surfactant: 50 g
- Denatured Alcohol 96º: 80 g
- Geogard 221 / Cosgard Preservative: 8 g
- Citric acid diluted to 20%: as required if pH adjustment is needed
Target pH: 6,0 - 7,5.
General step-by-step method
Phase 1 - Preparation
- Disinfect utensils, containers and the work surface.
- Weigh all ingredients separately.
- Prepare a 20% citric acid solution to adjust the pH drop by drop.
Phase 2 - Gelling
- Disperse the xanthan gum in the glycerine where the formula includes it.
- Gradually add the water and mix until the gum is hydrated.
- Allow to stand if lumps or bubbles appear.
Phase 3 - Surfactants
- Incorporate the surfactants slowly and mix without whisking to avoid excessive foam.
- If the formula includes alcohol, add it at the end of this phase and mix again.
- Homogenise with gentle movements until the mixture is uniform.
Phase 4 - Preservation, pH and standing
- Add the preservative and mix to distribute it well.
- Measure the pH and adjust gradually if necessary.
- Allow to stand for 24 hours before assessing viscosity, foam, transparency and initial stability.
Validation note
These recipes are starting formulations. Before manufacturing for others or marketing, stability, preservation, packaging compatibility, labelling and compliance with the regulations applicable to the product type must be validated.
Simple formulas to get started
Solubility: Very soluble in water; readily soluble in ethanol and oils
Related products
Reviews
Customer reviews 28 item(s)
| Rating |
|
|---|
View original
Fácil de usar, me gusta la espuma que hace, lo uso en casi todos mis champús o geles
View original
Un imprescindible
Pros (original): Muchas por lo suave que es
Cons (original): Ninguna
| Rating |
|
|---|
View original
Para mis champús me va de lujo.
View original
Lo uso para mis gel de ducha
Pros (original): Muchas
Cons (original): Ninguna
View original
Buena calidad
View original
ideal para hacer lavaplatos
View original
para mezclar con otros tensioactivos vegetales para champú sólido y líquido
View original
Es la primera vez que lo compro y me están gustando los resultados. Muy bien envasado
View original
Es un producto que compro habitualmente, con muy buena relación calidad-precio.
| Rating |
|
|---|
View original
Imprescindible
To write a review, sign in to your account.
Sign in