One-pot cream with Self-Emulsifying Wax HP

This formula uses the emulsifier as the key technical ingredient: although water is the largest component, the emulsifier is the ingredient that allows the cream to exist and retain its structure. EmulBHP allows a hot one-pot process and is formulated at 6%, within the range in the data sheet. The recipe is intended to evaluate stability, silky feel and emulsifying capacity with a moderate oil phase. This is an indicative suggestion that must be validated before scaling up: stability, viscosity, pH, preservation, container compatibility and tolerance in use.

Base formula

Include	Product	%	Quantity	Price / pack size
Oil phase / emulsifier
	HP Self-emulsifying Wax	6 %	6 g	€0.34 used (1 x 50 g · purchase €2.85) Approx. leftover 44 g
	Coco Caprilate / Caprate	8 %	8 g	€0.58 used (1 x 50 ml · purchase €3.60) Approx. leftover 42 ml
	Sweet Almond Oil	9 %	9 g	€0.21 used (1 x 125 ml · purchase €2.95) Approx. leftover 116 ml
Aqueous phase
	Distilled water	72.2 %	72.2 g	Manual addition
	Vegetable glycerine	4 %	4 g	€0.09 used (1 x 125 g · purchase €2.90) Approx. leftover 121 g
Cooling phase
	Geogard 221 Preservative	0.8 %	0.8 g	€0.16 used (1 x 10 ml · purchase €2.05) Approx. leftover 9.2 ml

Step by step

1 Room temperature

Prepare and disinfect

Clean the worktop and disinfect the beakers, spatulas, blender, thermometer and final container. In a water-containing formula, hygiene is as important as accurate weighing.

Also prepare pH strips or a pH meter, because this recipe is not considered complete until the final pH has been checked.

2 Room temperature

Weigh the phases

Weigh the aqueous phase into one beaker and the oil phase with the emulsifier into another. If using a one-pot method, you can weigh everything that will be heated into the same beaker, leaving the preservative until the end.

Check the total before heating. It is much easier to correct a weight now than when the cream has already been emulsified.

3 70-75 ºC

Heat until melted

Heat to 70-75 ºC, or until the emulsifier has melted completely and the phase looks uniform. Do not raise the temperature unnecessarily.

If any flakes or unmelted spots remain, wait and mix gently before emulsifying.

4 70-75 ºC

Emulsify patiently

Combine the hot phases and mix with a low-power blender for one or two minutes. Then alternate short rests with manual mixing so that the emulsion gradually develops body.

Do not worry if it seems runny at first. Many emulsions gain viscosity as they cool.

5 <35 ºC

Cool and add the preservative

Continue mixing occasionally as the temperature falls. Once it is below 35 ºC, add the preservative and mix thoroughly.

Do not add the preservative while hot unless its technical data sheet permits this. Here we incorporate it in the final phase as a cautious approach.

6 <35 ºC

Measure and adjust the pH

Measure the pH once the formula is cool. The indicative target is 5.2-5.8.

If adjustment is needed, make small changes, mix, wait a few minutes and measure again. A sudden adjustment can spoil the texture or take the formula outside its comfortable range.

Final Room temperature

Package and validate

Transfer to a clean, dry container, label it with the date and leave to rest for 24 hours before assessing the final texture.

Over several days, check separation, smell, colour, viscosity and feel during use. If it is to be sold, this home test does not replace full cosmetic validation.

Preservation, shelf life and validation

Indicative formula for external cosmetic use. Disinfect utensils and containers, work hygienically and avoid touching the finished formula with your hands.
As it contains water, it needs a preservative and microbiological validation if it is to be sold or stored for a prolonged period. Do not use if its smell, colour or texture changes, or if unusual separation appears.

Questions, improvements and possible corrections

If you have a question about this recipe, notice a possible error or would like to suggest an improvement, please let us know here.

Leave blank

Question about the recipe Possible error or correction Suggested improvement

Name Email for our reply

Message Email me when this message receives a reply.

We review messages before publishing them. Please do not include personal data or medical questions; if the answer could help others, we will publish it as an answered question.