Light facial cream with Olivem 1000

The formula is designed around the emulsifier as the functional ingredient that supports the recipe. Although its percentage is lower than that of the water or oils, it is the component that allows the cream to form and is therefore considered the key technical ingredient. Olivem 1000 is used as the main emulsifier to create a classic O/W cream with a moderate oil phase and a comfortable feel. This is an indicative suggestion: before making it in quantity, stability, viscosity, pH, container compatibility, preservation and skin tolerance must be tested.

Base formula

Include	Product	%	Quantity	Price / pack size
Oil phase
	Olivem 1000	6 %	6 g	€0.88 used (1 x 50 g · purchase €7.35) Approx. leftover 44 g
	Coco Caprilate / Caprate	9 %	9 g	€0.65 used (1 x 50 ml · purchase €3.60) Approx. leftover 41 ml
	Organic Virgin Jojoba Oil	8 %	8 g	€1.05 used (1 x 30 ml · purchase €3.95) Approx. leftover 22 ml
Aqueous phase
	Distilled water	72 %	72 g	Manual addition
	Vegetable glycerine	4 %	4 g	€0.09 used (1 x 125 g · purchase €2.90) Approx. leftover 121 g
	Xanthan Gum	0.2 %	0.2 g	€0.02 used (1 x 25 g · purchase €2.45) Approx. leftover 24.8 g
Cooling phase
	Geogard 221 Preservative	0.8 %	0.8 g	€0.16 used (1 x 10 ml · purchase €2.05) Approx. leftover 9.2 ml

Step by step

1 Room temperature

Disinfect and prepare the equipment

Before weighing, clean the worktop and disinfect the beakers, stirring rods, spatulas, thermometer and final container. In a water-containing cream, hygiene is not a minor detail: it is one of the most important parts of the formula.

Also prepare pH strips or a pH meter, because the pH will need to be checked before considering the recipe complete.

2 Room temperature

Prepare the aqueous phase

Weigh the water and glycerine into a heat-resistant beaker. Sprinkle in the xanthan gum gradually while mixing to avoid lumps.

Leave it to hydrate for a few minutes. If you see small specks of unhydrated gum, continue mixing patiently before heating.

3 70-75 ºC

Prepare the oil phase

In another beaker, weigh the oils and Olivem 1000. This will be the phase that gives the cream body and structure.

Heat the aqueous phase and oil phase separately to around 70-75 ºC. The oil phase should be fully melted and uniform before combining.

4 70-75 ºC

Emulsify

Pour the oil phase into the hot aqueous phase and mix with a low-power blender or stirrer for one or two minutes. Then alternate short pulses with manual stirring.

It may seem runny at first; this is normal. The viscosity usually increases as the emulsion cools.

5 <35 ºC

Cool with gentle mixing

Continue stirring gently as the cream cools. There is no need to whisk continuously, but it is helpful to stir occasionally so that it cools evenly.

Once it is below 35 ºC, you can move on to the final phase.

6 <35 ºC

Add the preservative and check the pH

Add the preservative and mix until it is fully distributed. Do not add it while hot: wait until the cream is below 35 ºC.

Then measure the pH. The indicative range for this recipe is 5.0-5.8. If it is outside the range, adjust gradually and measure again until stable.

Final Room temperature

Package and validate

Transfer the cream to a clean, dry jar or airless container. Label it with the name, date and test batch.

Do not assess the formula only when it is freshly made. Check it after 24 hours and over several days: separation, smell, colour, texture, loss of viscosity, feel on the skin and compatibility with the container.

Preservation, shelf life and validation

Indicative formula for external cosmetic use. Disinfect utensils and containers, work hygienically and avoid touching the finished cream with your hands.
As it contains water, it needs a preservative and microbiological validation if it is to be sold or stored for a prolonged period. Do not use if its smell, colour or texture changes, or if unusual separation appears.

Questions, improvements and possible corrections

If you have a question about this recipe, notice a possible error or would like to suggest an improvement, please let us know here.

Leave blank

Question about the recipe Possible error or correction Suggested improvement

Name Email for our reply

Message Email me when this message receives a reply.

We review messages before publishing them. Please do not include personal data or medical questions; if the answer could help others, we will publish it as an answered question.